Tech Reflection

 LI: To create a joint for our creations

For tech today Mr Grundy taught us how to create a joint. Mr Grundy showed us how to make a joint by ruling out the lines and and then cutting it half way in using the saw to cut it through then using a chisel and a mallet to scrap thin pieces of wood that is in the joint to create the joint for the next wood piece to go in. I am making a piano and have to create two joints for my piano. If we ever made the joint to tight then we could sand down the wood with sandpaper until it fits into the joint.

One thing that I learnt today was that we could keep sanding down the wood to make it fit in the wood. 
One thing that I liked was cutting the wood becuase i liked to use the saw to cut through the wood.